Our Harvia Outdoor Sauna is the same as our Prefab Sauna except that it includes an unassembled cedar shingle roof package.
Warranty: 1 Year
Are you looking to install a sauna room at home but aren’t sure where to start? Then you should take a look at our one of our Harvia outdoor sauna rooms. These are designed to give you every opportunity that you need to enjoy a satisfying at-home sauna installation. Easy to work with and very satisfying to build upon, these are the ideal starting places for just about anyone who would like an outdoor sauna that’s easy to build, to keep care of, and to maintain.
These are identical to our Harvia prefabricated saunas, but they come with an unassembled cedar shingle roof package. This gives you total control over the construction and development of the sauna room, allowing you to fit the roof as and when you would be ready.
For a simple at home building project that delivers a positive end result, take a look at our collection.Our outdoor Sauna is the same as our Prefab Sauna except that it includes an unassembled cedar shingle roof package. You supply the waterproof pad and we provide the insulated modular room. Outdoor Saunas may be assembled on a concrete pad or on a deck. If installing on a deck first put down a sheet of ¾" plywood covered by vinyl or use concrete board with tile.The roof package includes wood plates, prefab rafters, nailers, facing, metal flashing, cedar shingles, ridge cap, and nails. You put it together. It includes the same components as the standard Prefab Sauna package. The Harvia Outdoor Sauna is available in sizes ranging from 4'x 4' to 8'x 8'.
- Assembled Benches
- FLB60 Heater With Built In Controls
- Prehung Door With Clear Glass
- 0301K Thermometer
- 102N Bucket With Liner
- 106/40 Dipper
- P5511 Wall Light
- 079 Headrest For Each Upper Bench
- Bathing Sign
- Heater Fence
- Standard rough sawn Mahogany plywood for the sauna exterior
FRP Roof Kit comes unassembled. The kit includes Facia pieces, Rafter sections, Risers, Nailers, Side Trim, Cedar Shingles, Top Ridge, Metal Flashing, Liner for underside of front, back, and sides, and Nails. Roofing felt paper is not included. The finished height is 8' 6". The roof overhangs the prefab Sauna by 6" on the back and the sides and overhangs 12" in the front. When using a roof kit power enters at the front of the side wall near the bottom, close to where the heater is located. The upper vent is cut in the ceiling and it vents through the eaves.
The Outdoor Kit includes Stainless Steel Hinges, Wet Location Light Switch, Custom Electrical, and includes sealing the glass in the Sauna door and any additional sidelight windows
Both the above kits are included in the price as standard. The STR Starline Skylight Roof Kit is an option extra.
STR Starline Skylight Roof Kit
STR Roof Kit comes in one piece. It is a made of 3 layers of Thermopane Acrylic. The skylight roof is tinted but is clear enough to see through. It lets in sunlight during the day and starlight at night. The Starline roof is available in 4' x 4', 4' x 6', 5' x 6', 6' x 6', 5' x 7', and 6' x 8' sizes. When using the skylight roof kit power enters at the front of the side wall near the bottom, close to where the heater is located.
- Voltage: 240V
- Phase 1
- Amperage: 25 Amp
- Power: 6 kW
- Wire size: 10
- Equipped with timer
- Built-in control panel
- Thermostat and timer can be relocated
- Wall mounted unit
- Large stone space
- Outer casing temperature is left unaffected
- Desired sauna temperature is set by turning the knob
- Thermostat on lower part of heater
- Thermostat and timer are located on right or left side of the heater, as the requirement
- 170-300 min - max. cu.ft. sauna room
- Harvia HEATERS HAVE 5 YEARS LIMITED WARRANTY when installed according to Finlandia specifications and wiring information
We are so confident in the quality of our products and that you will be satisfied, so if you are not happy with any aspect of your sauna when it is arrives, you can send it back for a full refund.